How to change the speed of the video (double speed / slow speed) | How to proceed without hesitation by changing the video speed

What you want to decide before starting to change the speed of the video (double speed / slow speed)

In the method of changing the speed of the video (double speed / slow speed), if you decide what you want to convey first, editing will not shake easily. Rather than including everything, it is easier to become a short but transmitted one by narrowing down the scene you want to look back and the point you want to explain first.

Especially if you want to take advantage of the main points such as the curved line speed course, it is important not to add too much effect before arranging the order of the materials. When organizing your mindset, use an entrance like CapCut's speed ramp as a reference to make it easier to see where to start.

• Decide who the video is for and what you want to convey first.
• A similar cut leaves only the best moment.
• At first, use a short scale as a guide and think on the premise of adding it later.
• Arrange the flow before the effect.

Hard to fail with video speed change

It is easy to worry about changing the video speed, rather than the lack of features, it is to enter too much production and detail before deciding the order. If you arrange the materials first, then arrange the length, and finally strengthen only the main part in the curved line speed course, the whole will be less cluttered.

Also, if you think about the point of view of slow editing, you can reduce redoing by checking "what is transmitted when you look back" once in the middle. Before you get into practice, it's a good idea to understand the range of online video editing -like features available on the wire.

• At first, arrange them roughly and make a state where the flow can be seen first.
• The main recommendation function is used only for the moment you want to show the most.
• Characters and BGM are added at the end to prevent excessive information.
• Once you see it through, shorten only the part that feels long.

CapCut to change the speed of the video (double speed / slow speed)

CapCut, place the material first, drop unnecessary spaces, and then touch the main push function in order to stabilize. It is easier to reduce the number of corrections by making a single skeleton and then strengthening the showcase rather than going into fine adjustments immediately after starting editing.

Then, starting with CapCut online video editing , adding auxiliary wires such as CapCut image stabilization if necessary makes it easier to prepare only the scene that will be the main role. It is more natural to add while watching the flow than to touch everything at once.

STEP 1
1. Arrange the materials to be used and remove unnecessary parts first.
STEP 2
2. Decide the scene to be the leading role and shorten the flow before and after.
STEP 3
3. Use the curve speed course to emphasize only the moments you want to show the most.
STEP 4
4. Finally, look at the whole and confirm the length, visibility, and volume.

Change the speed of the video (double speed, slow speed) Points to finish the way easy to see

The last thing that's important is that it's more visible than flashy. If you check whether the main pushing function is too prominent and the overall flow is not cut off, or if there are too many characters and sounds that interfere with the original content, the impression after publication will be easier to stabilize.

At the finishing stage, the trick is to add only the necessary auxiliary functions such as CapCut image stabilization . Rather than trying to arrange everything, it is easier to become a natural and long-lasting one by lightly fixing only the parts that are worrisome when looking back.

• Make sure you know what the video is in the first few seconds.
• Don't add too much effect except in the scene you want to emphasize.
• Review whether the characters, sounds, and ratios match the publisher.
• Finally, look through it once and cut only the part that feels long.

Frequently Asked Questions (FAQ)

Can even beginners proceed with how to change the speed of the video (double speed / slow speed)?

Yes. Without trying to arrange everything from the beginning, it will be easier for even beginners to proceed by arranging the materials, cutting unnecessary parts, and dividing them in the order of preparing the showcase with the main pushing function.

Where should I adjust the video speed first?

First is flow and length. If you decide which order to show before directing and fine-tuning, it will be much easier to modify afterwards.

Do you have any tips to prevent overdoing in the finish?

It is to strengthen only the scene that you want to show the most without adding effects to everything. At the end, it will be easier to organize naturally by looking through it once and fixing only the parts you care about.

In the method of changing the speed of the video (double speed / slow), it is a shortcut to arrange the scene you want to convey in a short and easy-to-understand manner rather than incorporating everything. CapCut, it is easy to proceed with one flow from material arrangement to finish centering on speed adjustment, and it is easy to organize into one easy to look back.